Our cycle timer allows the pump to be set in either a Continuous “On” mode or a “Cycle” mode which allows for the pump to be turned On and Off repeatedly until the timer is turned Off. This allows for the mist to fully evaporate and prevent condensation from building up too much in the area. By default it is setup for 30 seconds on and 30 seconds off.
Cycle Timer with Remote
$96.00
Oour remote control works up to 800′ away!
In stock
Additional information
Weight | .4 lbs |
---|---|
Dimensions | 3 × 3 × 1 in |
Related products
Brass Regulator
$60.00
2hp THREE PHASE
$579.00
2 hp Three phase motor 56 C face, 208-230/460volt/3, comes standard as 208v 3phase special arrangements need to be made for 460v needs, 60hz, Totally Enclosed Fan Cooled, 1800 rpm 4 pole, Draws 6.6-6.0/3.0Amps respectively, keyed shaft 41lbs, 1.15 service factor, continuous duty cycle, comes with TWO YEAR nameplate warranty longest in the industry! If under reasonable wear and tear motor fails to spin within the first 2 years send us back the nameplate and we will issue you a new motor plus shipping and handling
0-4 GPM Regulator
$75.00
1/2 HP Motor
$367.00
1/2 horse power motor, 56 C face, 115volt / 208 - 230 volt, comes standard as 115volt special arrangements need to be made for 220v needs, 60hz, Totally Enclosed Fan Cooled, 1800 rpm 4 pole, Draws 8.8 amps at full load 115v and at 220v 4.9-4.4 Amps respectively, keyed shaft 27 lbs, 1.15 service factor, continuous duty cycle, comes with TWO YEAR nameplate warranty longest in the industry! If under reasonable wear and tear motor fails to spin within the first 2 years send us back the nameplate and we will issue you a new motor plus shipping and handling
Thermal Relief Valve
$10.00
3 HP Motor – Single phase
$820.00